Necchi NC-102D Instruction Manual page 19

10. Lower the presser foot lifter.
11. Lower the needle threader lever slowly
and draw the thread through the thread
guide as illustrated and then to the right.
①
Lever
②
Hook pin
12. The needle threader automatically turns
to the threading position and the hook pin
passes through the needle eye.
①
Hook pin
②
Needle
1
2
13. Take the thread in front of the needle.
①
Hook pin
1
14. Hold the thread loosely and release the
lever slowly. The hook turns and passes
the thread through the needle eye forming
a loop.
Pull the thread through the needle eye.
Your machine is threaded and ready for
sewing, follow the instructions on "Starting
to sew" chapter to start sewing. (Page 38)
13
Note