Two-Step Presser Foot Lifter; Adjust Presser Foot Pressure - Necchi NC-102D Instruction Manual

Two-step presser foot lifter

Adjust presser foot pressure

The presser foot lifter is to raise or lower your
presser foot.
When sewing multi-layers or thick fabrics, the
presser foot can be further raised up manually
to allow enough space for your sewing work.
Note
The needle must always be at the highest
position.
The presser foot pressure dial is on the top
left of the face plate.
The presser foot pressure of the machine
has been pre-set and requires no particular
adjustment for general sewing.
Basic presser foot pressure setting: "2".
For sewing with very thin fabric, reduce
the pressure by turning the dial counter-
clockwise. If kept turning the dial, it could
be take out. By that time, just turn the screw
clockwise, it could be locked back and
readjust the pressure.
For heavy fabric, increase the pressure by
turning it clockwise. Once dial could not be
moved any further, it has been reached the
bottom, please do not turn any more.
7