WORLD RECORD BREAKING TECHNOLOGY
OKUR +12V, GROUND, REMOTE CONNECTION DIAGRAM
Remote turn on
3-4. SPEAKER CONNECTION
DB Drive recommends to use minimum 12 gauge speaker connecting cables. Run 12 gauge speaker
connecting cables from your speakers to OKUR ampliﬁer's mounting location.
Keep speaker cables away from power cables and OKUR ampliﬁer's input cables. Use grommets anywhere
the cables have to pass through the holes in the metal frame or sheet metal. Connect to the speakers
according to the type of terminals on each speaker. Strip 3/8" of insulation from the end of each cable and
twist the cables strands together tightly. Make sure there are no stray strands that might touch other cables
or terminals and cause a short circuit.
Crimp spade lugs over the cable ends or tin the ends with solder to provide a secure termination.
Connect the cable ends to Platinum series ampliﬁers as speaker system diagram.
OKUR DIGITAL AMPLIFIERS' SPEAKER CONNECTION DIAGRAM 1.
8~ 1 ohms
A7750.1, A71100.1, A71500.1, A72000.1, A72500.1 ampliﬁers
minimum impedance is 1 ohms. Linked minimum impedance is 2 ohms.