Page 1
This Quick Installation Guide has everything you need to get your Vonage Internet ® Phone Service working with the D-Link VTA. Take a look at the equipment, follow the simple instructions provided here, and in no time at all you’ll be part of the telephone revolution.
Vonage VTA Telephone Adapter RJ-11 Phone Cable CD-ROM with User Guide System Requirements An available Broadband connection Router A valid Vonage account* * If you purchased your Vonage Telephone Adapter from a retail location, you must first activate your Vonage phone service by visiting www.vonage.com/activate.
Power When the power light Solid light indicates stops blinking and is a connectivity to your solid green, this indicates router or network that your adapter has - whenever there is started up properly. Note data activity this light that both the power light will blink.
Connect the blue Ethernet cable into the blue port labeled Internet on the back of the telephone adapter. Connect the other end to one of your router’s Ethernet ports. Verify the status lights on the unit. The Power, Phone 1, and Internet status lights should be solid green.
Page 6
Insert the provided RJ-11 telephone cable into the green port labeled Phone 1 on the back of the Vonage adapter. Connect the other end to your telephone. If you activate a second Vonage phone line, then connect another phone or FAX machine into the Phone 2 port.
The following are common issues that may come up during installation of the telephone adapter. If you do not hear a dial tone and/or the Phone 1 light is not on, go through this checklist to solve this problem: • Make sure your phone is plugged into the Phone 1 Port on the VTA, and that it is disconnected from the wall jacks that traditional phone companies use.