Kenmore 721.80402 Use & Care Manual page 29

GLASS TRAY
PROBLEM
The glass tray will not
move.
TONES
PROBLEM
You do not hear
the programming or
end-of-cycle tone.
DISPLAY MESSAGES
PROBLEM
The display is flashing " : ".
If none of these items are causing your problem, call Sears Service at 1-800-4-MY-HOME
CAUSE
• The glass tray is not correctly in place. It should be correct-side up and sitting
firmly on the center hub.
• The support is not operating correctly. Remove the glass tray and restart the
oven. If the hub still does not move, call Sears Service at 1-800-4-MY-HOME
Cooking without the glass tray can give you poor results.
CAUSE
• You have not entered the correct command.
CAUSE
• There has been a power interruption. Reset the clock. (See the " Clock " section
on Page 13.)
TROUBLESHOOTING
®
.
® .
29