Specifications; Functional Description - Makita CV101D Instruction Manual

• Be careful not to drop or strike battery.
• Do not use a damaged battery.
• Follow your local regulations relating to disposal of
battery.
Tips for maintaining maximum battery life
• Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
• Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F).
• Let a hot battery cartridge cool down before charging it.
• Charge the battery cartridge if you do not use it for a
long period (more than six months).
• For an optimum life-time, the battery cartridge have to
be fully charged, after use.
FCC Cautions to the user
The changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
The equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful
interference to radio communication.
However, there is no grantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
ICES-003 STANDARD : CAN ICES-3(B)/NMB-3(B)
For United States:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
SAVE THESE INSTRUCTIONS.
DESIGNATION OF PARTS (Fig. 1)
1. Power button
2. Battery holder pocket (Backside)
3. Power cable (Inside the battery holder pocket)
4. Hole for strap
5. Battery holder
(See the last part of this instruction manual for all the
illustrations.)
4

SPECIFICATIONS

Model
Temperature adjustment
steps
Material
USB power supply port
Operating time (h)
Low
Medium
High
Rated voltage (V)
Battery cartridge
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Operating time may differ depending on battery type
and usage condition.

FUNCTIONAL DESCRIPTION

Switch action
To turn on the vest, push and hold the power button
(about 1.5 seconds). To turn off, push and hold the power
button again.
Temperature adjustment
There are three temperature settings (high, medium, low).
Three LED lights means that the temperature is set to
"high", two LED lights "medium", and one LED light "low".
When you switch on the vest, the temperature is set to
"high". Each press of the power button cycles through the
vest's temperature setting.
Indicating the remaining battery capacity
(Fig. 2)
(Only for battery cartridges with "B" at the end of the
model number.)
Press the check button (7) on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps (6) light up for few seconds.
CV101D
3
Shell and lining:
- Nylon 100%
Side:
- Polyester 90%
- Spandex 10%
Armhole circumference & Fill:
- Polyester 100%
DC 5V, 2.1A
With battery BL1041B
APPROX. 14
APPROX. 7.5
APPROX. 4.0
DC 10.8 V - 12 V max
BL1016, BL1021B, BL1041B