Fragmentation Threshold - D-Link DWL-120 Manual

Using the Configuration Utility
Configuration>WEP Setting
WEP type:
Select 128 bit WEP or 64 bit WEP encryption
Default Key ID:
1 is the default key, or you may select a key from 1-4
Input WEP keys:
Input up to 4 WEP keys in hexadecimal format
Click OK if you have made any changes
Configuration>Advanced Setting

Fragmentation Threshold:

The fragmentation threshold, which is specified in bytes, determines whether
packets will be fragmented. Packets exceeding the 2346 byte setting will be
fragmented before transmission.
Click OK if you have made any changes
If you enable WEP
encryption make
sure to match the
WEP encryption on the
router or access point.
WEP stands for Wired
Equivalent Privacy. It is a
security protocol for Wire-
less Local Area Networks
Hexadecimal format
consists of numbers 0-9
and letters a-f.
Power Save:
Select Enable or Disable;
Disable is the default setting
RTS Threshold:
Request to Send threshold
measures the value in bytes.
Any packet size exceeding
2432 will trigger the DWL-120
to use RTS/CTS mechanism
for transmission.
15