Table of Contents
Advertisement
(B). My DSB-R100 's volume indicator is blinking
normally, the switches are all functioning properly,
and the speaker is on, but I don't hear anything.
Why is this?
ANS: Try turning off the volume indicator. If you are then
able to hear sound, this shows that the sound card was
unable to transmit sound to the speakers while it was
recording a WAVE file. The solution is to turn off the
volume indicator. The reason for this is that the
DSB-R100 must turn on its record function when the
volume indicator is turned on (see question 10 for an
explanation). Another solution is to open Win95's
Mixer (double click on the speaker icon in the lower
right part of the screen to open the Mixer) and change
several of the special record options on the record page;
see if you can simultaneously hear sound and cause the
volume meter to appear. For example, if you use the
ESS sound chip, it should be possible to find the volume
monitor switch in the mixer control program; turning on
this switch will generally solve this problem.
Testing throughout the design process has proven
that the DSB-R100 is completely compatible with
most sound cards on the market.
35
Advertisement
Table of Contents
