Tracmaster Camon C275 Operating Instructions & Safety Notes

TOWING
Undo the flap adjuster screw.
Release the pipe locking clamp and lower the pipe into the pipe locating bracket.
Tighten the flap adjuster screw.
Unhook the operating cable from the actuating arm and clip back round chassis.
Raise the rear stabiliser and lock into place.
Check lighting board operation.
Check handbrake is OFF before towing.
Check operation of jockey wheel and that it is raised before towing.
Teknol House, Victoria Road, Burgess Hill, W est Sussex RH15 9LH
Tel: 01444 247689 Fax: 01444 871612
Website: www.tracmaster.co.uk E-mail: info@tracmaster.co.uk
(Fig. 2)
C275 WOOD CHIPPER
OPERATING INSTRUCTIONS
IMPORTANT -
Fig. 2
ALWAYS stop the engine and the machine before making any
adjustments, refuelling, moving or cleaning or when the unit is unattended
ALWAYS ensure that guards are in place when the machine is operating
DO NOT remove any safety guards that are fitted
ALWAYS wear suitable clothing and footwear to give personal protection
KEEP hands, feet and clothing out of openings, discharge and moving parts
when the machine is operating or the engine is running
DO NOT touch any moving parts or attempt any maintenance whilst the
machine is running - KEEP HANDS AND FEET AWAY
DO NOT allow children or anyone uninstructed to operate the machine -
IF A FAULT develops DO NOT attempt any repair - immediately contact
the supplier from whom the machine was obtained
No liability will be accepted for any damage caused to persons or property
through failure to observe operating and safety instructions.
C275D/0904
CAMON
DIESEL MODEL
& SAFETY NOTES
PLEASE READ CAREFULLY
SAFETY
ALWAYS start the engine in the open air
DO NOT smoke when refuelling
or the engine is running
ALWAYS wear safety glasses and ear protectors
KEEP ANIMALS AWAY