Product Information - Acer ET322QU User Manual

2. Using the ▲/▼ keys, select System from the OSD. Then navigate to the picture
element you wish to adjust.
3. Use the ◄/► keys to select the setting.
4. Input: Select the source
5. Auto Source: Default is On, support auto source.
6. DP Format: Default is DP1.2, can selection support DP1.1 or DP1.2 format.
7. Wide Mode: You can select which screen aspect you are using. The options are
Full, Aspect and 1:1.
8. PIP/PBP: Select to set PIP/PBP.
9. Hotkey Assigment: Select the function of shortcut key 1(Brightness, Volume, Gamma,
Contrast, Blue Light, Over Drive, PIP/PBP) and shortcut keys 2 (Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive, PIP/PBP).
-----------------------------------------------------------------------------------------------------------
Note: Hot Key 1 and Hot Key 2 can't repeat the same function.
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
11. HDMI Black Level: Select to set HDMI black level.
12. Quick Start Mode: Select Off or On. Turn on to speed up boot speed.

Product information

Mode - Standard
Picture
Main Source
HDMI
Color
Resolution
1920x1080
Audio
H/V Frequency
Pertormance
H: 66 KHz V: 60 Hz
OSD
Serial Number:
MN53035032682018TPV888
System
Reset All Settings
Information
Reset All Settings
Non-Enable PIP/PBP
1. Press the Menu hot key
2. Using the ▲/▼ keys, select Information to view the basic information for your monitor
and current input, resolution, modes and series number.
3. Reset all settings: Reset the custom color settings to factory defaults.
from VGA IN, HDMI, or
to open the OSD.
DP.
Mode - Standard
Picture
Main Source
HDMI
Color
Resolution
1920x1080
Audio
H/V Frequency
Pertormance
H: 66 KHz V: 60 Hz
OSD
Serial Number:
MN53035032682018TPV888
System
Reset All Settings
Information
Reset All Settings
Enable PIP/PBP
Sub Source
DP
Resolution
1920x1080
H/V Frequency
H: 66 KHz V: 60 Hz