Appendix - D-Link DMP-90 User Manual

APPENDIX

If the DMP-90 can't be detected by DMP-90.exe while it's still turned on, it
is likely that your computer is using a non-compliant Parallel Port setting.
The DMP-90 requires that you have an ECP-compliant Parallel port.
Parallel ports are typically used for the connection of a printer. As a result
the computer industry has a number of communication methods that have
changed over the years for the Parallel port. SPP, EPP, and ECP are a
number of Parallel port modes. The current ECP is required to ensure that
the DMP-90 can communicate with your computer. To check if your
Parallel port is set to ECP, please go to (1) How can I determine if my
Parallel port is set to ECP?
(1) How can I determine if my Parallel port is set to ECP?
To check if you computer's Parallel port is currently configured to ECP
please follow these steps:
A)Click Start->Setting->Control Panel
17