Ip Settings; Nat Settings - D-Link DPH-540 User Manual

IP Settings

After selecting IP Settings, the following options will appear:
• Fixed IP - Enter the IP address, subnet mask, gateway address, and DNS Server addresses manually
• DHCP - Select this option if your network has a DCHP server or router that assigns the IP settings
automatically
• PPPoE - Select PPPoE if your network requires a username and password to connect to the Internet. If you are
using DSL with PPPoE and are using a broadband router, you do not need to use this option - select DHCP or
Fixed IP.

NAT Settings

After selecting NAT Settings, the following options will appear (this information is supplied to you by your VoIP
provider):
• NAT Solution - Select Disable or STUN.
• NAT TImer - Select this option if your network has a DCHP server or router that assigns the IP settings
automatically.
• STUN Address - Enter the STUN IP address.
• STUN Port - Enter the STUN Port.
D-Link DPH-540 User Manual 5