Table of Contents
Advertisement
Configuration
Configuring the Phone Using a Web Browser
This is the H.323 configuration page. You can set the Gatekeeper IP address, dial plan,
phone number, and phone name. After completing configuration, you must click the
Save button to save your new configuration settings.
Gatekeeper IP Address: Enter the IP address of the Gatekeeper for
the phone.
Dial Plan: The DPH-100H allows provisioning of the dial plan via a Web
browser. A dial plan gives the unit a map to determine when a complete
number has been entered and should be passed to the gatekeeper for
resolution into an IP address. Dial plans are expressed using the syntax
described in the MGCP NCS specification.
Example: A dial plan of (x.T|xxxxx) will match immediately if 5 digits are
entered; it will also match after a four-second pause during which no
digits are entered.
The Timer T is activated when it is all that is required to produce a
match. The period of timer T defaults to four seconds.
H.323 Parameter Configuration Page
15
Advertisement
Table of Contents
