Installing the DVD-ROM reader in a host PC
Refer to the guidebook included with your personal computer for instruc-
tions on installing the DVD-ROM reader. This chapter gives one example
1. Attach the mounting rails to both the left and right sides of the DVD-
2. Turn off the computer, other peripherals and unplug all the cords and
3. Slide the disk drive out approximately 50 ~ 70mm (2 ~ 3 in.), but do
4. Slide the DVD-ROM reader into the computer until it is even with the
cables. Then remove the computer cover, face plate, mounting clips,
and keeper bracket. Refer to the Guide to Operations that came with
your computer for help with this step.
not disconnect the cables.
99.4.26, 5:32 PM