AEG BEE255632M User Manual page 8

8 www.aeg.com
5.2 Turning the oven on and
off
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To turn off the oven, turn the knobs
for the oven functions and
temperature to the off position.
The lamp turns on when the oven
operates.
5.3 Heating functions
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.
5.4 Activating the True Fan
Cooking PLUS function
This function allows to improve humidity
during the cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Do not open the oven door when the
function operates.
• Open the oven door with care after
the function stops.
Refer to "Hints and tips"
chapter.
1. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
2. Put food in the oven and close the
oven door.
3. Set the True Fan Cooking PLUS
function: .
4. Press the Plus Steam button
The Plus Steam button works only
with the True Fan Cooking PLUS
function.
The indicator turns on.
5. Turn the knob for the temperature to
select a temperature.
6. To turn off the oven, press the Plus
Steam button
the oven functions and temperature
to the off position.
The indicator of the Plus Steam button
turns off.
7. Remove water from the cavity
embossment.
WARNING!
Make sure that the oven
is cool before you
remove the remaining
water from the cavity
embossment.
5.5 Fast heat up function
The fast heat up function decreases the
heat up time.
Do not put food in the oven
when the Fast heat up
function operates.
1. Set the fast heat up function. Refer to
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
An acoustic signal sounds when the
appliance is at the set temperature.
The fast heat up function
does not deactivate after the
acoustic signal. You must
deactivate the function
manually.
3. Set an oven function.
.
, turn the knobs for