Selecting The Connected Usb Source; Disconnecting A Usb Device Or Camera From The Projector; Connecting To A Document Camera - Epson PowerLite 2042 User Manual

3. Connect the other end of the cable (if applicable) to your device.
Parent topic:

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the USB-A port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB button on the remote control.
Parent topic:

Disconnecting a USB Device or Camera From the Projector

When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic:

Connecting to a Document Camera

You can connect a document camera to your projector to project images viewed by the camera.
Depending on your Epson document camera model, do one of the following to connect the document
camera to your projector:
• For the Epson DC-07 document camera, locate the USB cable that came with the camera and
connect it to the projector's USB-A port and to the document camera's USB Type B port.
• For the Epson DC-13 document camera, connect it to the projector's HDMI, Computer, or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
Connecting to External USB Devices
Connecting to External USB Devices
Connecting to External USB Devices
45