Pc Settings - Sanyo XT-43S7200F Owner's Manual

Notes:
1.Some non-standard mobile storage device may
not be recognized. Please change to use the
standard device.
2.This system supports the following file formats:
Picture format: JPEG、BMP、PNG
Codec
Meida File Text
Video
MPEG-4,
.avi
H.264
MPEG-2,
.mp4 MPEG-4,
H.264
Movie
.mkv / MPEG-4,
.mov H.264
MPEG-1,
.mpg
MPEG-2
.dat MPEG-1
.vob MPEG-2
.mp3 /
Music
Note: For coding files, there are many kinds nonstandard
coding method, so this system can not be
guaranteed to support the file formats using any coding
method.
Notes:
1. Under the following conditions, this system cannot
decode the file and the file cannot be play normally:
-The parameters of file, such as the pixel of picture,
code rate of audio and video file, sampling rate of
audio file, exceed the limit of the system;
-The format of file is not matched or the file is harmed.
Note: The code rate of this system does not support if it
exceed 20Mbps.
2. Hot plug: Do not disconnect when the system is
reading or transmitting data, avoid damaging the
system or the device.
3. Pay attention to the power supply of the device when
you are using a mobile hard disk or a digital camera.
If the power supply is not sufficient or not stable, you
may encounter problems during operating or can not
operate at all. In this case, please restart the device,
or unplug the device and plug it again, and ensure that
its power supply is normal.
Audio
MP3,
MP2,
MP2
MP3
Advanced Functions
4. The system supports standard USB1.1 and USB2.0
devices, such as standard U-disks, MP3 players,
mobile hard disks, etc..
5. For obtaining better audio and video quality, It is
suggested to use the external device which accords
with USB2.0 standard.
6. When playing the video with high compression ratio,
these phenomenons, such as picture standstill and
menu long time response, are normal.
7. For some USB device with power supply, such as large
size hard disk, MP4, etc., Suggests using it with power
to avoid electric power shortage. The parameters of
file, such as the pixel of picture, code rate of audio and
video file, sampling rate of audio file, exceed the limit
of the system.

PC Settings

Display the menu by pressing the MENU button. Press the
up or down direction button to select the PC icon and
press the OK button to enter the PC menu.
Note: This function is only available in PC mode.
Menu
Auto Adjust
PICTURE
Horizontal Pos.
Vertical Pos.
Size
SOUND
Phase
TIMER
SETTINGS
LOCK
PC
Access
OK
Auto Adjust: Press the right direction or OK button to
adjust the picture's position, phase and clock automatically.
The menu will auto exit when finishing the adjusting.
Note: This function is only available in PC mode.
H Position (Horizontal Pos.): Adjusts the picture's
position left or right.
V Position (Vertical Pos.): Adjusts the picture's
position upward or downward.
Clock: Adjusts the clock sync of the picture.
Phase: Adjusts the picture if there is flicker of screen
letters, color misalignment, or blurring.
Press Return key to return to menu or Exit key to
close the menu.
16
50
35
50
55
Select
RETURN
Menu