Freezer Section; Freezer Shelf; Ice Storage Bin - Kenmore 795.5181 Use & Care Manual

FREEZER SECTION

FREEZER SHELF

To assemble or disassemble the freezer shelf—Pull
the shelf towards the front
contact the support on the guide. Lift the shelf so
the hook clears the support guide (view detail).
Hook
Support
guide
Tilt the shelf then pull it toward you
3
. The shelf hook will
1
.
2

ICE STORAGE BIN

The ice bin stores the ice cubes made by the icemaker. If
you need to remove the ice storage bin, do so as follows:
NOTE: Use both hands to remove the ice bin to avoid
dropping it.
• Hold the ice storage bin as shown in the fi gure on the
left. Lift it while slightly pulling it out
2
1
• To assemble the ice storage bin, lift it
pushing it in .
NOTE: Make sure the bin is fully engaged into the auger
drive . If not, rotate the auger drive in the direction
shown by the arrow until the bin is fully engaged into the
auger drive.
ICEMAKER COVER
If you need access to the icemaker, follow these steps:
• Lift the ice shelf
2
23
USING YOUR REFRIGERATOR
4
3
while slightly
5
and pull it out .
1
.