Remote Control Preparation & Use; Front Display Panel - CyberHome CH-DVR 1600MU Operation Manual

Remote Control Preparation & Use
Remote Control Use
The battery is already installed into the remote
control.
1
Turn over the remote to the back cover. Pull the
plastic tab to enable the battery in the remote. Your
remote is now ready for use.
Plastic Tab
2
Replace the battery, check for the correct polarity of
the battery in the battery holder. Slide the battery
holder back into the remote.
+

Front Display Panel

5
AUDIO
1
of an Audio CD, MP3, etc.
PLAY / PAUSE
2
status.
TITLE / CLOCK
3
Elapsed Playback Time, and system
clock is displayed in Standby Mode.
4
TIMER
recording is set.
Remote Control
Pull
Battery
+
1 2
AUDIO
VIDEO
DVD R W
6
- Displays during playback
- Displays playback
- Displays Chapter,
- Glows when a schedule
3
To replace the battery in the remote, depress the
release clip while pulling the handle of the battery
holder to access the battery.
Remote Control
Using the Remote Control
The remote control works best when pointed directly at
the unit. Stay within 30 angle of the unit.
3
5
VIDEO - Glows during playback of a
DVD Video.
DVD R / W - Displays the respective
6
recordable disc format, +R or +RW.
7
PHOTO - Glows during display of
JPG files.
8
RECORD - Displays when actively
recording .
7
Functions
Battery Holder
Release Clip
Handle
0
15
30 30
4
TIMER
RECORD
PHOTO
7 8
6