Image Colors Are Patchy At The Edges; Image Is Too Dark; Back Of Original Image Appears In Scanned Image; Ripple Patterns Appear In An Image - Epson ET-2600 User Manual

Hide thumbs Also See for ET-2600:
Table of Contents

Advertisement

Image Colors are Patchy at the Edges

If you are scanning a thick or warped original, cover its edges with paper to block external light as you
scan it.
Parent topic:

Image is Too Dark

If your scanned image is too dark, try these solutions:
• Select the Advanced Settings tab in Epson Scan 2 and adjust the Brightness setting.
• Check the brightness and contrast settings of your computer monitor.
Parent topic:
Related references
Additional Scanning Settings - Advanced Settings Tab

Back of Original Image Appears in Scanned Image

If an image from the back of a thin original appears in your scanned image, try these solutions:
• Place a piece of black paper on the back of the original and scan it again.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Advanced Settings tab and adjust the Brightness setting.
• If the Image Type is set to Black & White, select Text Enhancement. If the Image Type is set to
Color or Grayscale, change the Text Enhancement setting to High.
Parent topic:

Ripple Patterns Appear in an Image

You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused
by interference from differing pitches in the scanner's screen and your original's halftone screen. To
reduce this effect, adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Descreening setting.
• Select a lower Resolution setting.
Parent topic:
Related references
Additional Scanning Settings - Advanced Settings Tab
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents