Grill Head to Cart
□ This step requires two people to lift and position grill head onto cart.
□ Remove the tie wraps and packaging material from regulator hose, side burner valve and igniter
wire. Pull hose and igniter wire out to side of grill head.
□ Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wire are
hanging outside the cart.
□ Line up control panel so that it is flush with front panels. Attach head to cart with (4) M6X13 screws.
M6X13 screw Qty: 4 pcs
A
146.34611411 • 23