Adjusting The Rear Brake Light Switch - Yamaha KODIAK 450 YFM450FAT Owner's Manual

Hide thumbs Also See for KODIAK 450 YFM450FAT:
Table of Contents

Advertisement

1. Rear brake light switch
2. Adjusting nut
1. Contacteur de feu stop sur frein arrière
2. Écrou de réglage
1. Interruptor de la luz del freno trasero
2. Tuerca de ajuste

Adjusting the rear brake light switch

The rear brake light switch, which is activated by
the brake pedal and rear brake lever, is properly
adjusted when the brake light comes on just be-
fore braking takes effect. If necessary, adjust the
brake light switch as follows.
1. Remove panel B. (See page 8-23 for panel
removal and installation procedures.)
2. Turn the adjusting nut while holding the rear
brake light switch in place. To make the brake
light come on earlier, turn the adjusting nut in
direction a. To make the brake light come on
later, turn the adjusting nut in direction b.
3. Install the panel.
8-109
EBU12590

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents