Coolant - Yamaha GRIZZLY 700 FI YFM7FGPX Owner's Manual

Hide thumbs Also See for GRIZZLY 700 FI YFM7FGPX:
Table of Contents

Advertisement

Tightening torque:
Differential gear oil drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
5. Add the recommended differential gear oil to
the brim of the filler hole as shown.
1. Differential gear oil
2. Differential gear oil filler bolt
3. Correct oil level
Recommended differential gear oil:
See page 10-1.
ECB00410
CAUTION:
Be sure no foreign material enters the differen-
tial gear case.
6. Install the oil filler bolt, and then tighten it to the
specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
7. Check the differential gear case for oil leak-
age. If oil is leaking, check for the cause.
EBU23470

Coolant

The coolant level should be checked before each
ride. In addition, the coolant must be changed at
the intervals specified in the periodic maintenance
and lubrication chart.
EBU27122
To check the coolant level
1. Place the ATV on a level surface.
8-30
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents