Electrolux EWF 14012 User Manual page 7

3.4 Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your
laundry to be washed at a
temperature different from the one
proposed by the washing machine.
3.5 Spin Selection Touchpad
Press this touchpad repeatedly to
increase or decrease the spin
speed, if you want your laundry to
be spun at a speed different from
the one proposed by the washing
machine.
No Spin
No spin option eliminates all the
spin phases and increase the
number of rinses.
Extra Silent
By selecting this option, the
machine will not drain the water of
the last rinse to avoid wrinkling the
laundry. All spinning phases are
suppressed.
This washing cycle is very quiet, and
can be selected at night or other
appropriate times.
The door stays locked with the
water in the drum. To continue
the cycle you must press
(Start/Pause).
Rinse Hold
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent
the laundry creases.
The door is still locked to indicate
that the water must be emptied out.
The door stays locked with the
water in the drum. To continue
the cycle you must press
(Start/Pause).
3.6 Adjust Time Touchpad
This option allows you to reduce
washing time.
Press this touchpad repeatedly to
decrease or return to default
washing time.
This option will adjust the number
of rinse according to selected
washing time.
3.7 Delay Start Touchpad
This option makes it possible to
delay the start of the program by
30 min, 60 min or 90 min and
then by every hour from 2 to 20
hours.
The delay you have selected is
indicated on the display. The end
time will increase in order to show
you the selected delay.
You must select this option after
you have set the program and
before you press the Start/Pause
button.
If you wish to add laundry in the
machine during the delay time
press Start/Pause touchpad to put
the machine in pause mode. Add
laundry, close the door and press
Start/Pause touchpad again.
You can cancel the delay time at
any moment, by pressing 'Delay
Start' touchpad repeatedly till the
display shows delay time ' ', then
press the Start/Pause touchpad.
ENGLISH 7