Electrolux EWF 14012 User Manual page 25

To clean the water inlet filters:
8.9 The Dangers Of Freezing
If the machine is exposed to
temperatures below 0°C, certain
precautions should be taken.
Disconnect the mains plug
from the mains socket.
1. Turn off the water tap.
2. Unscrew the inlet hose.
3. Put a bowl below the recess of
the drain pump to collect the
water that flows out.
45°
1. Close the water tap.
2. Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose
with a stiff brush.
4.
Remove the inlet hose behind
the appliance.
5.
Clean the filter in the valve with
a stiff brush or a towel.
6. Install again the inlet hose.
Make sure that the couplings are
tight to prevent leakages.
7. Open the water tap.
4. Pull forward the drainage duct
and that of the inlet hose in a
bowl placed on the floor and let
water drain out.
5. Screw the water inlet hose back
on and reposition the drainage
duct.
When you intend to start the
machine up again, make sure that
the room temperature is above 0°C.
ENGLISH 25