Advertisement
Oven
Controls
5.
As soon as Self Clean
becomes
active,
a motor
driven
lock
mechanism
will begin
locking
the oven door automatically
and DOOR
and LOCKED
will appear
in the display.
Do not
open the oven door when DOOR
and LOCKED
are
displayed
(allow
15 seconds
for the lock mechanism
to lock
the oven). Once the oven door
has locked,
CLn will appear
in the display
indicating
Self Clean
has started.
When
Self Clean
is finished:
Use caution
when opening
the oven door after
self cleaning.
The oven may still be very hot and can cause
burns. To avoid
possible burns stand to the side of the oven when
opening
the oven door to allow
hot air or steam to escape.
The oven bake and broil elements
may appear
to have cooled
after
they have been turned
off. The elements
may still be hot and burns may occur if these elements
are
touched
before
they have cooled.
1.
CIn message
will turn off, and Hot will appear
in display
window.
2.
When
DOOR
and LOCKED disappear
from the display,
the
oven may be opened.
3.
When
the oven interior
has completely
cooled,
wipe
away
any residue or powdered
ash with a damp
cloth or paper
towel.
Important
note:
The kitchen
area should be well ventilated.
Use an open window,
ventilation
fan or exhaust
hood during
the first self clean cycle
to help eliminate
the normal
odors
associated
with the 1st self
clean cycle.
When
the clean time finishes the oven door will remain
locked
until the oven has cooled
sufficiently.
In addition
to the clean
time that was programmed,
allow about
1 additional
hour for
the oven to cool before
opening
the oven door. The Self Clean
function
will not operate
when the oven lockout
is active.
Setting
Delay
Start
Self Clean.
To start a delay Self Clean with default
clean time of 3 hours
and a start time of 9:00
o'clock:
1.
Be sure the clock is set with the correct
time of day, the oven
is empty
and ALL oven racks are removed.
Be sure oven
door is completely
closed.
2.
Press Self Clean.
3.
Press Delay Start.
4.
Using numeric
keys enter 9 0 0 for time to start.
5.
Press :START
"
If it becomes
necessary to stop Self Clean
when active:
1.
Press
sToP. DOOR
and LOCKED will flash.
2.
If Self Clean
has heated
the oven to a high temperature,
allow enough
time for the oven to cool. When
DOOR
and
LOCKED
disappear
from the display,
the oven may be
opened.
3.
Before
restarting
Self Clean,
be sure to read important
notes below.
Important
note:
•
When
Self Clean
is active
you may check the amount
of
clean time remaining
by pressing
the Self Clean
key once.
If your clock is set with the (default)
12 hr display
mode, the
Delay
Start for a Self Clean can only be programmed
to
start up to 11 hours and 59 minutes after
the time showing
in
the display
(be sure to set the clock
to current
time before
programming
a delay
start). To set a Delay Start Self Clean
to begin 12 or more hours (maximum
is 23 hours and 59
minutes)
after
the time of setting,
be sure to first set the
control
in the 24 Hr display
mode.
If Self Clean
was active
and then interrupted
by a power
failure
or cancelled
before
the oven was thoroughly
cleaned,
it may be necessary
to run another
Self Clean
cycle.
•
If the oven temperature
was high enough
when Self Clean
was interrupted
the oven control
may not allow another
Self
Clean cycle
to be set for up to 4 hours.
26
Advertisement
