Settings; Extender Settings - D-Link DAP-1365 User Manual

Section 3 - Configuration
This page lets you configure the settings for the DAP-1365's extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Existing Select the type of existing network, either Ethernet or Wi-Fi you want the
Network:
DAP-1365 to connect to.
Status: Enable or disable this network by toggling this slider.
Wi-Fi Name This is the name of the DAP-1365's extended network. If using Wi-Fi, the
(SSID): DAP-1365 will rebroadcast the uplink router's Internet connection under this
SSID. You may also manually set the SSID of the extended network.
Security: Select the type of wireless security you wish to use for the extended network.
Choose None or WPA/WPA2 Personal.
Password: Enter the password or network key that you wish to use for the extended
network.
Select Auto or any channel from 1 to 13 for use with this network.
Wi-Fi
Channel:
Select Auto 20/40 or 20 MHz for the bandwidth you wish this network to use.
Channel
Width:
HT20/40 Enable or disable HT20/40 coexistence by toggling the slider.
Coexistence:
D-Link DAP-1365 User Manual

Extender Settings

Existing Network
2.4 GHz Extended Wi-Fi

Settings

36