Troubleshooting - Beko WDC7523002W User Manual

7

Troubleshooting

Programmes do not start after the loading door is closed.
Start / Pause / Cancel button is not pressed.>>>
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem
(line voltage, water pressure, etc. >>>
reset the machine to factory settings. (See. "Cancelling the programme")
Water in the machine.
• Some water may remain in the product due to the quality control processes in the
production. >>>
There is water leaking from the bottom of the machine.
• There is a problem with hoses or the pump filter. >>>
inlet hoses are securely fitted. Attach the hose to the tap tightly.
• Pump filter is not closed securely. >>>
securely.
Machine does not fill with water.
• Tap is turned off. >>>
• Water inlet hose is bent. >>>
• Water inlet filter is clogged. >>>
• Loading door is not closed. >>>
Machine does not drain water.
• Water drain hose is clogged or twisted. >>>
• Pump filter is clogged. >>>
Machine vibrates or makes noise.
• Machine is standing unbalanced. >>>
• A hard substance has entered into the pump filter. >>>
• Transit bolts are not removed. >>>
• Laundry quantity in the machine is too little. >>>
• Machine is overloaded with laundry. >>>
machine or distribute the load by hand to balance it.
• Machine is in contact with a rigid surface. >>>
contacting anything.
Machine stopped shortly after the programme started.
• Machine has stopped temporarily due to low voltage. >>>
when the voltage restores to the normal level.
Machine directly discharges the water it takes in.
64 / EN
This is not a failure; water is not harmful to the machine.
Turn on the taps.
Flatten the hose.
Clean the filter.
Close the loading door.
Clean the pump filter.
*Press Start/Pause/Cancel button.
Press and hold On/Off button for 3 seconds to
Be sure the seals of the water
Make sure that the pump filter is closed
Clean or flatten the hose.
Adjust the feet to level the machine.
Remove the transit bolts.
Add more laundry to the machine.
Take out some of the laundry from the
Make sure that the machine is not
Clean the pump filter.
It will resume running
Washer-Dryer