Beko WDC7523002W User Manual page 63

Maintenance and cleaning
1. In order to clean the dirty filter and discharge the water, unplug the machine to cut
off the supply power.
CAUTION
• Temperature of the water inside the machine may
A
rise up to 90 ºC. To avoid the risk of burning, clean
the filter after the water inside the machine is cooled
down.
2. Open the filter cover.
Press the tab on the filter cover downwards and pull the cover out towards yourself.
3.To drain the water in the machine.
a Pull the emergency draining hose out from its seat.
b Place a large container at the end of the hose. Drain the water into the container
by pulling out the plug at the end of the hose. When the container is full, block the
inlet of the hose by replacing the plug. After the container is emptied, repeat the
above procedure to drain the water in the machine completely.
c When draining of water is finished, close the end by the plug again and fix the hose
in its place.
d Turn and remove the pump filter.
4. Clean any residues inside the filter as well as fibres, if any, around the pump
impeller region.
5. Replace the filter.
6. Close the filter cover.
User's Manual
63 / EN