Kenwood CK 440 FFD Instructions For Use Manual page 35

INSTALLATION OF BASE SKIRTING
Fig. 9.14
The base skirting assembly kit comprises:
- 2 long panels (front and rear)
- 2 lateral panels
- 8 feet
- 1 central rear bracket
- 1 clip for bracket fixture to panel
- 9 self-tapping screws
SKIRTING ASSEMBLY INSTRUCTIONS
• Press fit the eight feet P in the holes on the front, rear and lateral panels indicated in fig.
9.8 and 9.10.
• Join the front panel A to the right and left panels as shown in fig. 9.9.
• Slide the base skirting frame under the cooker (fig. 9.8). If the base does not fit under-
neath, raise the cooker to the required height by unscrewing the lower section of the
cooker feet (see instruction booklet).
• Fit clip C over the central hole on the rear panel R (fig. 9.11).
W
F
LS
Fig. 9.8
P
F
A
A
LD
P
Fig. 9.9
LD
35