Table of Contents
Advertisement
Fig. 2
CLEANING THE RADIANTS
The ceramics may discolour slightly over a period of time, this is normal for radiant
fires. Any dust or small soot deposits that accumulate on the ceramics can easily
be cleaned. Carefully remove the ceramics and brush gently with a soft brush.
To remove the ceramic, remove the dress-guard as shown in fig. 2. Remove the
radiants by lifting them slightly then pulling forward as shown below in Fig. 3
Fig. 3
6
Rear face of radiant
plaques to be placed
against positioning
brackets when
re-fitting
Advertisement
Table of Contents
