Settings; Canceling The Demo Mode; Basic Setting Operation; General Setup - Sony MEX-N4000BT Operating Instructions Manual

Activating voice recognition (Android
phone only)
By registering applications, you can control an
application by voice command. For details, refer to
the help of the application.
To activate voice recognition
1
Press ENTER to activate voice recognition.
2
Say the desired voice command into the
microphone when [Say Source or App] appears on
the Android phone.
Notes
 Voice recognition may not be available in some cases.
 Voice recognition may not work properly depending
on the performance of the connected Android phone.
 Operate under conditions where noise such as engine
sound is minimized during voice recognition.
 Using an external microphone (not supplied) will
improve voice recognition.
When a music or video application is
selected*
Press 1 or 2 to enter HID mode, and press SEEK +/–
to select a playback item, then press ENTER to start
playback.
* Available only for an Android phone supporting
HID (Human Interface Device Profile).
Making sound settings
You can adjust the settings for EQ, BAL/FAD/SW
Level and Position via your smartphone.
For details on settings, refer to the help of the
application.
16
GB

Settings

Canceling the DEMO Mode

You can cancel the demonstration display which
appears while this unit is turned off.
1
Press MENU, rotate the control dial to
select [DISPLAY], then press it.
2
Rotate the control dial to select [DEMO],
then press it.
3
Rotate the control dial to select [DEMO-
OFF], then press it.
The setting is complete.
4
Press (back) twice.
The display returns to normal reception/play
mode.

Basic Setting Operation

You can set items in the menu to the following
procedure.
The following items can be set depending on the
source and setting.
1
Press MENU.
2
Rotate the control dial to select the setup
category, then press it.
Setup categories are follows:
 GENERAL setup (page 16)
 SOUND setup (page 17)
 DISPLAY setup (page 18)
 BT (BLUETOOTH) setup (page 18)
 APP REM (App Remote) setup (page 19)
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).

GENERAL Setup

CLOCK-ADJ (clock adjust) (page 6)
CAUT ALM (caution alarm) (page 6)
Activates the caution alarm: [ON], [OFF].
(Available only when the unit is turned off.)
BEEP
Activates the beep sound: [ON], [OFF].