Table of Contents
Advertisement
disassemble or clean the inside of the tool by yourself.
Early request for cleaning is recommended at all times.
Replacing carbon brushes
1
001146
When the resin insulating tip inside the carbon brush is
exposed to contact the commutator, it will automatically
shut off the motor. When this occurs, both carbon
brushes should be replaced. Keep the carbon brushes
clean and free to slip in the holders. Both carbon brushes
should be replaced at the same time. Use only identical
carbon brushes.
1
2
012036
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
1. Commutator
2. Insulating tip
2
3. Carbon brush
3
1. Brush holder
cap
2. Screwdriver
OPTIONAL ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Abrasive discs (wet type)
•
Side grip
•
Rubber pad
•
Lock nut
•
Lock nut wrench
•
125mm dust cover set
•
Offset diamond wheel
•
Offset-diamond-wheel cover
•
NOTE:
Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
10
or
attachments
Only use
accessory or
are
Advertisement
Table of Contents
