Removing Water From The Tank - Mitsubishi Electric MJ-E16VX-A1 Instruction Manual

Removing Water from the Tank

The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 4 L) is full.
Empty the tank.
12
1
Remove the water tank.
<Hold the tank this way>
Do not remove or dismantle the floating element in the
tank. If it is removed, the unit cannot detect when the
tank is full, and this could result in leakage.
Open the front
door.
Grasp handle and
slide out.
2
Remove the tank lid, and empty.
Tank lid
Floating element
Do not remove or dismantle
the float.
3
Reattach the tank lid and replace
the water tank.
Confirm that the lid is securely attached to the
water tank, and push the tank in.
Close the front door.
z If the lid is not properly closed, you may have
problems removing the tank.
z If the tank is not installed correctly, the tank full
lamp will come on, and the unit will not operate.
Pour the water out
as shown.
21