Table of Contents
Advertisement
17. Fit front top panel plastic hinge covers
on the opposite sides. (16)
18. Remove the handle cover gently
taking care not to damage the
appliance.(17)
19. Unscrew and remove the handle (18).
Do not unscrew the yellow coloured
screws!
20. Rotate 180 degrees and fit handle
to the other side after removing hole
plugs gently.(19,20)
21. Fit the handle cover.(21)
22. Adjust the two front feet if necessary.
23. Check that door opens and closes
easily, it is aligned correctly and there
are no gaps allowing air into the
cabinet. If there are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
the door using fingers.
24. Check that all the hinge screws are
tightened. Avoid over tightening the
screws.
25. Put all items, fittings back in the
appliance.
26. Wait for at least 4 hours to allow the
system to settle before switching on.
27. Once the correct storage
temperatures have been reached in
the appliance, put back all the food.
12
EN
Advertisement
Table of Contents
