Table of Contents
Advertisement
3
Attach light adapter to back panel using four #8-32x3/8" screws, 4mm lock washers, 4mm flat washers and #8 nuts,
shown A.
Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using two
1/4-20x1/2" screws and 7mm lock washers each side. Secure lower back panel to bottom shelf using one 1/4-20x1/2"
screw and 7mm lock washer, shown B.
#8-32x3/8" screw
Qty.4
4mm lock washer
Qty.4
4mm flat washer
Qty.4
#8 Nut
Qty.4
#8 Nut
Adapter
4
This step requires two people
to lift and position grill head
onto cart.
Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging inside
the cart. Grill head must face open
side of cart.
1/4-20x1/2" screw
Qty.5
7mm
lock washer
Qty.5
A
4mm flat
washer
4mm lock
washer
#8-32x3/8"
screw
7mm
1/4-20x1/2"
lock washer
screw
Adapter
1/4-20x1/2"
screw
7mm
lock washer
B
Grill head
Regulator hose
464222609 • 17
Advertisement
Table of Contents
