Grab-N-Go Case - Kenmore 795.7235 series Use & Care Manual

GRAB-N-GO
The Grab-N-Go compartment allows for easy access to
commonly used food items.
The inner Grab-N-Go door includes two door bins, the
Cheese & Butter and Condiment bins, that are specially
designed for food that can be stored at a warmer
temperature. This makes spreading butter and slicing
cheese easier.
NOTE: The Cheese & Butter and Condiment bins are not
recommended for storing items that spoil easily such as
milk and mayonnaise.
GRAB-N-GO COMPARTMENT
To access the Grab-N-Go
compartment, ligthly press the button
on the right refrigerator door handle
to open the door.
There is no need to grip the handle
when opening the Grab-N-Go door.
If the handle is gripped when the
button is pressed you may hear a
clicking noise. This is normal.

GRAB-N-GO CASE

To open the Grab-N-Go case, slightly push the marked
area to pop it open. The Grab-N-Go Case is removable
for easy cleaning and adjustment.
1. To remove the Grab-N-Go case, lift up and pull out.
2. To replace the Grab-N-Go case, line the tabs on
the Grab-N-Go Case with the slots on the door
and push down until it snaps into place.
Cheese &
Butter Bin
Condiment Bin
27
< Open > < Removing >
GRAB-N-GO DOOR BINS
The Grab-N-Go inner and outer door bins are removable
for easy cleaning.
1. To remove the door bins, lift up and pull out.
2. To replace the door bins, slide the door bin in above the
desired support and push down until it snaps into place.
GRAB-N-GO LOWER SHELF
The Grab-N-Go lower shelf is removable for easy
cleaning.
1. To remove the lower shelf, lift the shelf retainer up
and out.
2. Remove the two screws from the shelf and pull it
straight out.
3. Reverse the procedure to replace the shelf.
1
USING YOUR REFRIGERATOR
< Assembling >
2
3