Table of Contents
Advertisement
Switch to standby mode
•
In Bluetooth mode, if Bluetooth connection
is invalid or music playback is stopped
for 15 minutes, this speaker switches to
standby mode automatically.
•
In Audio-in mode, if the audio-in cable is
disconnected or music playback is stopped
for 15 minutes, this speaker switches to
standby mode automatically.
» To return to Bluetooth or Audio-in mode,
slide the source selector to OFF first, then
or AUDIO IN position.
to
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
Note
•
Make sure that your Bluetooth device is compatible
with this speaker.
•
Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•
The speaker can memorize a maximum of 4 paired
devices.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
Connect a device manually
Note
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1
Slide the source selector to .
» The LED indicator flashes in blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3
When [BT3550] is displayed on your device,
select it to start pairing and connection. If
necessary, enter default password "0000".
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
EN
5
Advertisement
Table of Contents
