Component Video Connection - Pioneer HTZ808BD Operating Instructions Manual

Table of Contents

Installation

NOTE

• Changing the resolution when the connection

has already been established may result in

malfunctions. To solve the problem, turn off the

player and then turn it on again.

• When the HDMI connection with HDCP is not

verifi ed, TV screen is changed to black screen.

In this case, check the HDMI connection, or

disconnect the HDMI cable.

• If there is noise or lines on the screen, please

check the HDMI cable (length is generally

limited to 4.5 m and use a high speed HDMI

cable (version 1.3).

• If a connected HDMI device does not accept the

audio output of the player, the HDMI

device's audio sound may be distorted or may

not output.

• When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to "Resolution Setting" on page 23.)

• Select the type of video output from the HDMI

OUT jack using [HDMI Color Setting] option on

the [Setup] menu (see page 34).

• When you connect a HDMI or DVI compatible

device make sure of the following:

- Try switching off the HDMI/DVI device and this

player. Next, switch on the HDMI/DVI device

and leave it for around 30 seconds, then switch

on this player.

- The connected device's video input is set

correctly for this unit.

- The connected device is compatible with

720x576p (480p), 1280x720p, 1920x1080i or

1920x1080p video input.

• Not all HDCP-compatible HDMI or DVI devices

will work with this player.

- The picture will not be displayed properly with

non-HDCP device.

- This player does not playback and TV screen is

changed to black screen.