Connecting A Usb Flash Drive To And Detaching It From The Digital Piano - Casio AP-450 User Manual

USB Flash Drive and USB Flash Drive
Port Handling Precautions
IMPORTANT!
• Be sure to observe the precautions provided in the
documentation that comes with the USB flash drive.
• Avoid using a USB flash drive under the following
conditions. Such conditions can corrupt data stored
on the USB flash drive.
• Areas subjected to high temperature, high
humidity, or corrosive gas
• Areas subjected to strong electrostatic charge and
digital noise
• Never remove the USB flash drive while data is
being written to or loaded from it. Doing so can
corrupt the data on the USB flash drive and damage
the USB flash drive port.
• Never insert anything besides a USB flash drive into
the USB flash drive port. Doing so creates the risk of
malfunction.
• A USB flash drive can become warm after very long
use. This is normal and does not indicate
malfunction.
• Static electricity conducted to the USB flash drive
port from your hand or from a USB flash drive can
cause malfunction of the digital piano. If this
happens, turn the digital piano off and then back on
again.
Copyrights
You are allowed to use recordings for your own
personal use. Any reproduction of an audio or music
format file, without the permission of its copyright
holder, is strictly prohibited under copyright laws
and international treaties. Also, making such files
available on the Internet or distributing them to third
parties, regardless of whether such activities are
conducted with or without compensation, is strictly
prohibited under copyright laws and international
treaties. CASIO COMPUTER CO., LTD. shall not be
held in any way liable for any use of this digital piano
that is illegal under copyright laws.
C
Connecting a USB Flash Drive
to and Detaching It from the
Digital Piano
IMPORTANT!
• Never plug any other device besides a USB flash
drive into the USB flash drive port.
• When you plug in a USB flash drive, the Digital
Piano initially needs to "mount" the USB flash drive
and prepare for data exchange. Note that Digital
Piano operations are momentarily disabled while a
USB flash drive mounting sequence is being
performed. The Digital Piano's L/R lamps flash while
the mounting process is in progress. It may take up
to 10 or 20 seconds or even longer for a USB flash
drive to be mounted. Do not attempt to perform any
operation on the Digital Piano while a mounting
sequence is in progress (while L/R lamps are
flashing). A USB flash drive needs to be mounted
each time it is connected to the Digital Piano.
■ To insert a USB flash drive
1.
As shown in the illustration below, insert the
USB flash drive into the digital piano's USB
flash drive port.
• Carefully push the USB flash drive in as far as it will
go. Do not use undue force when inserting the USB
flash drive.
■ To remove a USB flash drive
1.
Check to confirm that there is no data
exchange operation being performed, and
then pull the USB flash drive straight out.
USB Flash Drive
USB flash drive port
USB flash drive
E-27