AEG CDP 4201 MP3/VCD Instruction Manual & Guarantee page 42

3. Press the / II Play/Pause key (5) on the device in
order to switch it on. The word "rEAd" appears in the
display. The CD is now played back starting with the
fi rst track. The current song and the time that has
elapsed are shown in the display.
4. In order to remove a CD, press the
open the lid of the CD compartment with the OPEN
key and carefully remove the CD. Always keep the lid
of the CD compartment closed.
Note: When a disc is inserted incorrectly, "BAdisc"
appears in the display. If no disc is inserted, the words
"NO DISC" appear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R. The active ESP function
always appears in the display (memory 100 seconds);
see item "ESP/NP/DIR".
Programmed Playback
This makes it possible to program any order of tracks.
See the "PROGRAM" section in the tables below.
The device stops automatically after all programmed
tracks have been played. If the
once, playback is stopped and the program is deleted.
It is also deleted once playback has fi nished or after ap-
proximately 10 seconds as soon as the device switches
off automatically.
The programmed tracks can also be combined with the
REPEAT function. After you have programmed and star-
ted the device, please press the REPEAT key up to three
times to use the functions described in the "REPEAT"
section.
42
1. VCD Functions
•
•
STOP key,
•
•
•
stop key is pressed
Function Overviews
Please switch on your television set.
Switch your television set to AV mode.
witch on the device and insert a video CD, as descri-
bed above.
Press the / II Play/Pause key.
You can now watch the video clip on your television
screen while the sound can be heard through your
CD player.
Operation
Press ( / II) 1. The device is switched on and the disc sear-
ched.
2. Pause during playback
3. Playback is resumed.
Press STOP ( ) Playback is stopped.
Press Skips to the previous track.
(I (2/13))
Press With this key you can skip to the next or next-
( I (3/21)) but-one track etc.
Hold (I / Keep this key pressed down to start the fast
(2/16)) reverse search.
Hold ( I / Keep this key pressed down to start the fast
(3/18)) forward search.
Press MODE Switches between the simple repeat, repeat all
and RANDOM function.
Press NP Switches between "NTSC" and "PAL" video
output systems.
Press PBC Press once :
(Playback PBC switched on, display on the screen
Control) Press twice :
PBC switched off.
Press AUDIO function: selects between the settings
AUDIO/EQ left-hand channel, right-hand channel and
stereo.
REPEAT Press once =
"REPEAT 1": The current track is repeated
continuously.
Press twice =
"REPEAT ALL": The current CD is repeated
continuously.
Press 3 times =
"REPEAT CANCEL" All functions are cancelled.
Normal playback is resumed.
PROGRAM First press ( ), then PROG. The words "PROG"
and "TRK" appear in the display. Select the
order with the I
3 =+1) or with the
Select the order directly using the number
buttons (5). For a two-digit number, fi rst the +10
key and then the units fi gure. Programming is
already stored. Press (
SLOW Select between the speeds 1/2 ,1/4, 1/8, 1/16
RESUME Resumes from the same position after stop
(see RESUME)
DIGEST Shows the pictures in a small format
(see DIGEST)
ZOOM Used to enlarge a picture section (see ZOOM)
R/L Switches between the audio channels
VCD Functions
/ I keys (key 2 = +10, key
/ keys (16/18).
/ II).