Before Using For The First Time; Operation - Sensio Beautiful 19029 Instruction Manual

Before Using for the First Time

1. Remove all packaging materials including those
that may be inside the toasting slots.
2. Wipe the exterior with a damp cloth. Dry
thoroughly. Do not use abrasive cleaners.
3. Do not place the Toaster, cord or plug in water.
4. Make sure the crumb tray is locked into position
at the back of the Toaster.(Figure 1)
5. Unwrap the power cord from cord storage area
on underside of the Toaster and plug into a 120V
AC electrical outlet. Following the OPERATION
instructions, run 2 cycles of toast without bread
before the first use.
NOTE: Toaster may emit a thin smoke
on the initial use. This is normal and not
detrimental to the performance of the Toaster.

Operation

1. Make sure crumb tray is locked into position at the back of the Toaster.
(Figura 1)
2. Check to be sure no bread or other objects are inside the toasting
slots. Place the Toaster on a flat, level, heat resistant surface.
3. Remove all protective wrappings from food before placing into the
toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster
food that may get lodged in toasting slot(s).
4. Plug the power cord into a 120V AC electrical outlet. A tone will sound,
the control panel will illuminate for 1 second, then turn off.
5. The button will pulse slowly on and off until use.
15
Figure 1