Troubleshooting - Zanussi ZPHNL3W1 User Manual

Built-under double oven
Hide thumbs Also See for ZPHNL3W1:
Table of Contents

Advertisement

Step 7
Clean the glass panel with wa-
ter and soap. Dry the glass
panel carefully. Do not clean
the glass panels in the dish-
washer.
Step 8
After cleaning, do the above
steps in the opposite se-
quence.
Step 9
Install the smaller panel first, then the larger and the door.
Make sure that the glasses are inserted in the correct position otherwise the surface of
the door may overheat.
HOW TO REPLACE: LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.
22
Before you replace the lamp:
Disconnect the oven from the
Check if...
The fuse is blown.
Step 2
mains.
Problem
The display shows
"12.00".
The lamp does not
work.
Step 3
Put a cloth on the bottom of
the cavity.
Check if...
There was a power
cut. Set the time of
day.
The lamp is burnt
out.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZPHNL3W1 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Zphnl3x1944171732944171733

Table of Contents