Toyota Paseo 1998 Manual page 184

WWW.MANUALS.WS
3. Install the rubber cover with the
"TOP" mark upward, and snuggle on
the boss. Insert the connector. Then
install the plastic cover.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
188
WWW.MANUALS.WS
—Parking, front side marker
and front turn signal lights
Use a Phillips- head screwdriver.
'98 TERCEL (U)