Advertisement
Quick Links
Enable
USB Video
►
in the camera
During the whole process, after connecting the camera to the PC via USB in step
do not disconnect it – otherwise re-connection is required. In case of need of re-
connection, please first choose No in step
again. Only then the PC can recognize the device correctly.
Turn on the camera. Go to System setting ► USB Video and select Yes.
Connect the camera to the PC using USB cable.
Live video setup
Connect
the camera
►
to the PC
Quick guide
Set up an IP
►
, then Yes and connect the camera
►
page 1
Install
►
video driver
ThermoAnalyze2
v1.00 | 20.04.2020
Run Sonel
,
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sonel KT-320
Summary of Contents for Sonel KT-320
- Page 1 Live video setup v1.00 | 20.04.2020 Quick guide Enable Connect Install Run Sonel USB Video the camera Set up an IP ► ► ► ► video driver ThermoAnalyze2 in the camera to the PC During the whole process, after connecting the camera to the PC via USB in step do not disconnect it –...
- Page 2 Expand network list ( Click Network & Internet settings. Choose Change adapter options. Right-click Ethernet4 (Kindle USB RNDIS Device) and choose Properties. page 2...
- Page 3 Double-click Internet Protocol Version 4 (TCP/IPv4). Set IP address and mask as below and confirm. The third part of IP address should be 42. The fourth part should never be 29 since the fourth part in camera IP address is 29. Click OK. ►...
- Page 4 Now install the USB driver. Open folder kindle_rndis.inf_amd64. Right-click 5-runasadmin_register-CA-cer and run it as administrator. If the console displays messages as below, the operation was successful. Close the window. page 4...
- Page 5 Go to device manager (Desktop ► right-click on the computer icon ► Management). If the Kindle USB RNDIS Device (USBNetwork enabled) is not detected properly (an unknown USB device is visible), right-click it and choose Update driver. Click Browse my computer for driver software and then Browse. ►...
- Page 6 Run Sonel ThermoAnalyze2. Click Video, select KT-170/400, then USB and click Confirm. Live video is now available. page 6...
Need help?
Do you have a question about the KT-320 and is the answer not in the manual?
Questions and answers