Connections To Series 90 Controller; Optional Connections - Honeywell M9484 Manual

PROTECTION AS REQUIRED.
2 TRANSFORMER MAY BE INTERNAL OR EXTERNAL TO MOTOR.
SPDT SWITCH
OR SERIES 60
CONTROLLER
USED AS A
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD
PROTECTION AS REOUIRED.
USE SOLID LINE CONNECTION FOR POSITIVE CLOSING TO
2
MINIMUM POSITON. SUBSTITUTE
FOR POSITIVE FULL CLOSURE.
3 TRANSFORMER MAY BE INTERNAL OR EXTERNAL TO MOTOR.
CONTROLLER, MINIMUM POSITION PO-
TENTIOMETER (ETC.).
TRANSFORMER
DOTTED
LINE CONNECTION
SERIES 99
CONTROLLER

OPTIONAL CONNECTIONS

WITH 2-135 OHM POTENTIOMETERS IN SERIES.
SERIES 90
CONTROLLER
SERIES 90 HIGH
LIMIT CONTROL
1 POWER SUPPLY. PROVIDE
PROTECTION AS REQUIRED.
2 TRANSFORMER MAY BE INTERNAL OR EXTERNALTO MOTOR.
IG. 1 l-MOTOR
USED
LER AND A SERIES 90 LOW OR HIGH LIMI
CONTROL.
SOURCE
ION CHART IN TEXT.
2 SEE MOTOR SPECIFICATIONS FOR
L
FIG. 13-CONNECTlONS FOR MOTOR USED WITH 4
TO 20 mA CONTROL.
MOTOR
MOTOR
TRANSFORMER
DISCONNECT MEANS AN,, OVERLOAD
SINGLE MOTOR
SLAVE MOTOR(S)
63-2195-I