Spirit JOHNNY G Manual

Zwift connection guide

Hide thumbs Also See for JOHNNY G:

Download and install Zwift app on IOS or

Android devices or Windows PC.

Allow Zwift app to access the Johnny G

bike's Bluetooth.

Tap and pair HEART RATE and

CADENCE, the same as Power Source.

Program screen appears. Select RIDE.

JOHNNY G SPIRIT BIKE

ZWIFT

CONNECTION GUIDE

Create an account as directed by app or

Select RIDE and tap POWER SOURCE

to pair.

CONTROLLABLE can be paired if

wanting Zwift to control bike. Resistance

changes as grade of course changes.

Ride begins with bike data in upper corner

left of screen.

www.johnnygspiritbike.com

Select appropriate Bluetooth signal.

NOTE: If in a facility with multiple bikes,

assign Bike ID or ANT+ number to each bike

as described in the Johnny G Owner's Manual

and label each bike with the bike ID number.

Press LET'S GO.

Increasing WATTS output increases your

ride speed. Increasing the bike's resistance

level and cadence will increase watts.

Revised 09.24.2020

Table of Contents

Need help?

Do you have a question about the JOHNNY G and is the answer not in the manual?

Page 1 Download and install Zwift app on IOS or Create an account as directed by app or Android devices or Windows PC. Login to your profile. Allow Zwift app to access the Johnny G Select RIDE and tap POWER SOURCE Select appropriate Bluetooth signal. bike's Bluetooth.
Page 2 CONNECTION TROUBLESHOOTING ® If having difficulty connecting your Johnny G Spirit Bike to the Zwift app, follow the steps below to clear and establish a Bluetooth connection. • If Bluetooth not connecting, check to see if the bike BT is connected to another device (tablet or phone, watch, etc.).