Citiwell C50T Specifications

Parts of Your C50T Telescope

A. Telescope Tube
B. Objective Lens
C. Diagonal Mirror
D. Focus Tube
E. Eyepiece (3)
F. Mount Attachment Bolt
G. Table-Top Tripod
We constantly improve and update our products. Sometimes, as a result of these improvements,
what is seen on the package, or in the instructions may differ somewhat in color or content from

ASSEMBLY:

1) Carefully remove the components from the box.
2) Spread the Table-Top Tripod Legs out as far as they will go and stand the Tripod
on a firm surface.
3) Now attach the Telescope Tube to the tripod with the Mount Attachment Bolt and
nut. Tighten finger tight only. The Telescope Tube should be free to be angled up
or down for aiming.
4) The Focus Tube has a small screw inserted into it. Loosen this screw enough that
you can slide the Diagonal Mirror into the opening. Gently tighten the screw to
hold the Diagonal Mirror in position.
5) There are three eyepieces with this telescope. They are marked 30X, 40X and
50X. This means that when you use the 30X eyepiece objects will appear 30
times closer than how you normally see them with your eyes. The eyepieces
marked 40X and 50X make objects appear 40 or 50 times closer.
To begin, start with the 30X eyepiece. You will have to loosen the small screw on
the Diagonal Mirror enough so that the eyepiece slides easily into position. Then
retighten the screw just enough to keep the eyepiece from falling out.
Your telescope is now ready for use.
30X, 40X, and 50X Junior Telescope
E
the product in the package.
Recommended for ages 8+
orbitor C50T
A
C
D
B
F
G