To Avoid Fire - Silvercrest 7133016 Operation And Safety Notes

Safety
c CAUTION! DANGER OF ELECTRIC SHOCK! If the device
falls into the water, the first thing you must do is pull the mains adapt-
er out of the mains socket before you put your hands into the water.
c CAUTION! DANGER OF ELECTRIC SHOCK! never touch
the mains adapter with wet hands particularly when you insert or
pull out the adapter from the mains socket.
J
Handle the mains adapter only by its body when you insert it into
the mains socket.
J
Incorporation of a residual current device (RCD) with a rated trip
current of not more than 30 mA will provide you with additional
protection against electric shock. Have this RCD incorporated by
an electrician.
J
Use only the supplied original mains adapter for mains operation.
J
Regularly check the adapter and the hair and beard clippers for
any possible mechanical defects.
J
Replace defective parts with original replacement parts obtained from
a specialist dealer but never attempt to repair the device yourself!
J
Have all repairs carried out by a specialist dealer or through our
Service Centre (see Service Hotline on the warranty sheet).
J
Ensure that the lead does not become trapped in cup-
board doors or pass over hot surfaces. otherwise you
risk damaging the insulation on the lead.

To avoid fire:

J
Disconnect the mains adapter after use or before cleaning.
J
operate the device only in compliance with the rating plate.
never leave the device to operate unattended.
J
Pull the mains adapter out of the mains socket
- if a fault occurs,
- before you clean the device,
66 GB/MT