Carton Inventory
Your garage door opener is packaged in one carton
which contains the motor unit and the parts illustrated
below. Note that accessories will depend on the
model purchased. If anything is missing, carefully
check the packing material. Parts may be stuck in the
Lighted Door Control Button
with (2) 6ABx1-1/2" screws
Series 4200C & 4200C-2 (1)
Light Lens
Series 2200C (1)
Light Lens
Trolley
Safety Sensor
Bracket (2)
Series 4200C & 2200C (1)
Series 4200C-2 (2)
SECURITY
Single-Function
Remote Control Transmitter
Cable Pulley
Bracket
T-Rail
End Section (2)
T-Rail
Center Section (2)
Chain & Cable in
Dispensing Carton
Hanging Brackets
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
6
foam. Hardware for assembly and installation is
shown on the next page. Save the carton and
packing material until installation and adjustment is
complete.
2-Conductor Bell Wire
White & White/Red
Rail Brace (3)
Header Bracket
Sprocket Cover
Curved Door
Arm Section
Door Bracket
Straight Door
Arm Section
Safety Labels
and
Literature